Unitronic

Unitronic Performance ECU TCU Software Stage 1/1+/2 AUDI RS3 8V EVO TTRS 8S 400PS (DAZA or DNWA inc OPF OFF)

Name: Unitronic Performance ECU TCU Software Stage 1/1+/2 AUDI RS3 8V EVO TTRS 8S 400PS (DAZA or DNWA inc OPF OFF)
Brand: Unitronic
SKU: HAZ-219202-1
Price: 804.01 GBP
Availability: InStock

SKU: HAZ-219202-1

£804.01 inc. VAT

ECU Stage Stage 1 Stage 1+ Stage 2

DSG Software Not Required Stage 1 TCU Upgrade Stage 2 TCU Upgrade

Uniconnect+ Cable Not needed, I already have one Yes

Product variants

Unitronic Performance ECU TCU Software Stage 1/1+/2 AUDI RS3 8V EVO TTRS 8S 400PS (DAZA or (DNWA inc OPF OFF)

AUDI RS3 2.5TFSI EVO STOCK POWER: 400HP / 354LB-FT

Stage 1 ECU Description

Unitronic Stage 1 Performance Software is precisely calibrated for use with 91 octane / 95 RON fuel, engineered for a completely stock car. It is the performance upgrade that will result in the most gains!

UNITRONIC STAGE 1 : 476HP / 469LB-FT (91OCT/95RON GAS)

Stage 1+ ECU Description
Unitronic Stage 1+ E85 Performance Software is precisely calibrated for use with E60-E85 fuel, engineered for a vehicle that has full hardware bolt-ons. It is the performance upgrade that will result in the most gains!

UNITRONIC STAGE 1+ : 505HP / 496LB-FT (93 OCT / 98 RON GAS)

UNITRONIC STAGE 1+ : 592HP / 528LB-FT (E60-E85 Fuel)

Stage 2 ECU Description

Unitronic Stage 2 E85 Performance Software is precisely calibrated for use with E60-E85 fuel, engineered for a vehicle that has full hardware bolt-ons. It is the performance upgrade that will result in the most gains!

UNITRONIC STAGE 2 : 554HP / 527LB-FT (93OCT / 98 RON GAS)

UNITRONIC STAGE 2 : 581HP / 529LB-FT (104OCT / 109 RON GAS)

UNITRONIC STAGE 2 : 621HP / 564LB-FT (E60-E85 FUEL)

NOTE: E85 calibrations are not full flex fuel calibrations, therefore, when using an E85 ECU calibration, the engine is only designed to operate on E85 blends from E60-E85. Using an E85 calibration with pump gasoline or race gas may result in engine damage.

Performance Software for your ECU Box Code is subject to availability.

2019+ models may require to have the hood opened during the flashing process.

Stage 1 DSG Features

End-User Programmable with UniCONNECT+
Flash your TCU from the comfort of your own home or garage. Within minutes (approximately 70-seconds to be exact on this platform), you’ll be enjoying an entirely transformed driving experience.
Optimized D & Sport Modes
D-mode is optimized for everyday daily driving and economy, while S-mode is optimized for faster acceleration.
Quicker Gear Shifts
Unitronic’s TCU Performance Software calibration enhances the gear shift speeds making them up to 70% quicker.
Launch Control Engagement Limit Unlocked
Unitronic’s TCU Performance Software unlocks the factory launch control limiter. The OEM launch control limiter blocks the engagement of launch control after only 200 launches.

Stage 2 DSG Features

Includes all Stage1 features plus extra;

Raised Torque Limiters
Unitronic’s Stage 2 TCU Performance Software calibrations increase TCU torque limiters to allow for an increased output and has been developed alongside Unitronic’s upcoming Stage 2 ECU Performance Software for the ultimate overall experience.
Increased Clutch Clamping Pressure
Unitronic’s Stage 2 TCU Performance Software calibrations increase clutch clamping pressure and has been developed in conjunction with and alongside Unitronic’s Stage 2 ECU Performance Software, supporting the increase in engine torque output and ensuring that the clutches properly grip allowing for the higher output to be sustained.
Full Staged Software Suite
Includes all Stage 2 tune variants and all lower software stages as well.

Installation

Flashed directly through the (OBDII) Diagnostic port of your vehicle (15-20 minutes).

UNITRONIC’S UNICONNECT+

UniCONNECT+ is a Programming and Diagnostic Interface which gives users the freedom to reflash their Engine Control Unit (ECU) or Transmission Control Unit (TCU) from the comfort of their own garage. With the ability to upgrade the Unitronic Performance Software, flash back to stock, and also perform diagnostics, UniCONNECT+ is a complete end-user programming and diagnostic interface that provides control over your vehicle.

Minimum System Requirements:
Operating System: Microsoft Windows 7
Internet Explorer 11
Screen Resolution: 1024×768
Processor: 1.5 GHz or higher
Memory (RAM): 4GB or more

For optimal application performance:
Operating System: Microsoft Windows 7 or higher
Internet Explorer 11 or newer
Screen Resolution: 1024×768
Processor: 2.0 GHz or higher
Memory (RAM): 8GB or more3

Internet access is required.

NO DISCOUNT CODES to by used when purchasing Unitronic Software. Unfortunatley there is not enough margin for extra discount and your order will be refunded immediatley.

Distributed by Haz Motorsport

Country/region

Unitronic Performance ECU TCU Software Stage 1/1+/2 AUDI RS3 8V EVO TTRS 8S 400PS (DAZA or DNWA inc OPF OFF)