Forge Induction Kit + Turbo Inlet Adaptor Hyundai i30N/Veloster N Performance

MOCR007

Forge Motorsport

  • £478.78
    Unit price per 
Tax included. Shipping calculated at checkout.


Forge Induction Kit + Turbo Inlet Adaptor Hyundai i30N/Veloster N Performance

Induction Kit
Forge Motorsport are excited to release our industry leading intake for the Hyundai i30N. This aftermarket cold air intake system improves your i30N’s airflow in several key ways. It routes the air more directly into your engine, using a huge 102 mm diameter CNC mandrel bent alloy pipe. The aftermarket system also improves the airflow by adding a high-flow, high efficiency air filter in place of the more restrictive factory air filter. Finally, the cold air intake system is set up to allow cooler air to easily flow into your engine

The intake diameters on these air intakes have been carefully tuned to provide exactly the correct quantity of air ensuring solid consistent power gains throughout the rev range without any loss of low-end torque. The pipework is specifically designed to feed the turbo without interruption. The upshot to all of this is a gain of induction acoustics under acceleration, which improves the driving experience and adds a bit more drama to the Hyundai’s 2.0 four pot engine.

As always filtration is important when developing an intake, so we once again turned to the industry leaders and Forge long term filtration partners Pipercross.

With over 25 years’ experience in both the domestic and motorsport market they recommended a multi-layer foam construction filter, these filters work perfectly in our ‘Hi-Flow’ range. The large filter provided flows 60% more air than the stock filter.

The intake is finished off with our unique black thermal powder coating. This kit comes with Forge’s usual detailed fitting guide to help make installation as easy as possible.

Hyundai boast figures of 275bhp and 278lb.ft on their standard vehicle. When we ran our CAT backed performance exhaust development vehicle on the dyno with this intake it reached figures of 296bhp and 310lb.ft!

Inlet Adaptor
Designed and developed by our highly skilled team on the Solidworks CAD system, the all billet turbo adaptor and high flow silicone inlet pipe is proven to benefit your engines performance. With one of the weak links on the i30N and Veloster's intake system being the restrictive aluminium inlet pipe, we found something more was needed on stage 1 and 2 tuned vehicles. You can not go wrong with Forge hardware on your tuned Hyundai - the results speak for themselves!

Mated to our 4” intake and high performance filter (FMINDK28) the gain from the turbo adaptor alone was 10BHP, and, along with a gain in torque, it really transforms your driving experience. The power can be felt from just above 3000 RPM and helps keep a hard consistent pull all the way to the rev limiter.

The Forge developed turbo inlet adaptor improves your i30N or Veloster's airflow in several ways. Designed in a similar way to a conventional velocity stack, it routes the air more directly into your turbo charger and allows more air to be compressed due to its larger capacity. This can have a positive affect on accelerating your vehicle after long deceleration or in between gear changes due to more air being kept within the intake system.

The Forge turbo inlet adaptor and high flow inlet pipe has a capacity of more than 150% over the stock item. Not only will you notice the increased performance, but also a slight change in your engine acoustics can be heard.

Distributed by Haz Motorsport

We Also Recommend