🔥 RS3 8Y Drag Build — VTT 6-Piston Drag Brakes Ready for 15” Wheel Setup

🔥 RS3 8Y Drag Build — VTT 6-Piston Drag Brakes Ready for 15” Wheel Setup

🔥 RS3 8Y Drag Build — VTT 6-Piston Drag Brakes Ready for 15” Wheel Setup

When you’re pushing an RS3 8Y with a full-frame turbo setup, every part of the car needs to work toward one goal: traction, weight transfer, and clean acceleration. Brakes aren’t just for stopping — in the drag world, the right setup is what allows you to run the wheels and tyres that actually make the power usable.

That’s why @onsmoke_yt Ste is moving away from the massive OEM stoppers and switching to the VTT 6-piston drag brake system, complete with the GT36 rotor package. This setup is purpose-built to clear real 15” drag wheels — essential for achieving maximum sidewall and grip on the MQB platform.

More sidewall. More bite. More launch. More speed.

đź’Ş Why this setup works for big-power RS3 drag cars

  • Clears 15” drag wheels for maximum tyre sidewall

  • Reduces rotating mass = quicker spool and stronger 60ft

  • Lower unsprung weight improves weight transfer on launch

  • GT36 2-piece discs control heat during repeated VMAX shutdowns

  • Compact but powerful 6-piston caliper for serious clamping force

  • Tailored for full-frame turbo / 1000hp+ drag configurations

For anyone building a serious straight-line RS3, this is one of the most effective brake conversions available.

⚠️ Fitment Transparency — Our Honest Update

VTT has confirmed that this drag kit has been installed on the RS3 8Y platform.
However, we’re doing our own checks before giving a definitive green light. The 8Y has notable differences that may affect installation:

  • Updated knuckle geometry

  • Revised rotor height and offset

  • Possible need for bolt or washer spacing depending on the individual setup

We’ll publish exact fitment notes once we’ve personally verified everything. No assumptions — just clear, accurate information.

🎥 In the Video

A close look at the VTT 6-piston red calipers and GT36 2-piece discs chosen for @onsmoke_yt’s full-frame 8Y drag build — the hardware that will help translate four-figure horsepower into real-world traction.

#HazMotorsport #RS38Y #VTT #VargasTurbo #DragBrakes #15InchConversion
#FullFrameTurbo #BigTurboRS3 #AudiSport #DAZA #DNWA #Quattro #DragBuild #DragRacing
#GT36 #6PistonCalipers #PerformanceBrakes #AudiRS

Leave a comment

Please note, comments need to be approved before they are published.