Ceramizator Instructions

English instructions for the Ceramizator range. The retail packs are printed in Polish, so this page covers everything you need. Tap your product below. Questions? Email info@hazmotorsport.co.uk.

Ceramizator CS-B / CS-D · Cerator Ultimate CS-B / CS-D · Ceramizator CP-B / CP-D · Ceramizator CB-M / CB-A · Antykoks DPF / FAP · Antykoks EGR · Antykoks UP · Antykoks DOWN

Ceramizator CS-B / CS-D

Nano-ceramic engine oil treatment
Petrol engines: CS-B · Diesel engines: CS-D

How to use

  1. Warm the engine for about 15 minutes, then switch it off.
  2. Add the applicator contents through the oil filler cap.
  3. Restart and drive gently for the first 125 miles, keeping below 2,500 rpm.
  4. Full treatment takes about 900 miles of normal driving. Don't change the oil during this time.

How much to use

Engine mileage Applicators
Up to 62,000 miles ½
62,000 - 186,000 miles 1
Over 186,000 miles 2

Engine oil capacity over 10 L? Contact us for the right dose.

Good to know

  • It goes into the oil already in your engine - no oil change needed to apply it.
  • After the first 900 miles, service and change oil as normal.

Safety

  • Keep out of reach of children.
  • Wear gloves and avoid contact with skin and eyes.
  • If swallowed, get medical advice and show the pack or this page.
  • Take care - engine parts get hot.

Cerator Ultimate CS-B / CS-D

3-in-1 ceramic engine oil treatment, 300 ml
Petrol engines: CS-B Ultimate · Diesel engines: CS-D Ultimate

How to use

  1. Shake the bottle well for 60 seconds.
  2. With the engine warm, add the full bottle through the oil filler cap.
  3. Idle for 30 minutes, or drive about 30 miles.
  4. That's it - no oil change needed to apply it.

How much to use

Engine oil capacity Bottles
Up to 5 L 1

Engine takes more than 5 L of oil? Contact us for the right dose.

Good to know

  • One bottle treats one engine up to 5 L of oil.
  • Service and change oil as normal afterwards.

Safety

  • Keep out of reach of children.
  • Wear gloves and avoid contact with skin and eyes.
  • If swallowed, get medical advice and show the pack or this page.
  • Take care - engine parts get hot.

Ceramizator CP-B / CP-D

Ceramic fuel system treatment
Petrol fuel systems: CP-B · Diesel fuel systems: CP-D

How to use

  1. Add the applicator contents to the fuel tank, ideally just before filling up.
  2. Fill up with 25 - 35 L of fuel so it mixes well.
  3. Drive as normal.
  4. Repeat about every 3,000 miles.

How much to use

Fuel added Applicators
25 - 35 L 1

Use CP-B for petrol and CP-D for diesel.

Good to know

  • Pairs with Ceramizator CS for a complete engine and fuel system treatment.

Safety

  • Keep out of reach of children.
  • Wear gloves and avoid contact with skin and eyes.
  • If swallowed, get medical advice and show the pack or this page.
  • Take care - engine parts get hot.

Ceramizator CB-M / CB-A

Nano-ceramic gearbox treatment
Manual gearboxes: CB-M · Automatic & CVT: CB-A

How to use

  1. Warm the gearbox with about 3 miles of driving.
  2. Add the treatment through the gearbox fill or level plug (automatics: via the dipstick tube where fitted).
  3. Drive 15 - 30 miles, using every gear.

How much to use

Gearbox oil Manual CB-M Auto CB-A
Up to 3 L 1 -
3 - 6 L 2 -
4 - 8 L - 1
8 - 12 L - 2

Most manual cars need 1. DSG / dual-clutch? Contact us before use.

Good to know

  • No need to drain the gearbox oil to apply it.

Safety

  • Keep out of reach of children.
  • Wear gloves and avoid contact with skin and eyes.
  • If swallowed, get medical advice and show the pack or this page.
  • Take care - engine parts get hot.

Antykoks DPF / FAP

Diesel particulate filter cleaner, 250 ml
Diesel engines with a DPF or FAP filter

How to use

  1. Add the full can to the diesel tank.
  2. Fill up with 40 - 60 L of diesel.
  3. Take a steady drive of 20 minutes or more on a faster road so the DPF can regenerate.

How much to use

Diesel added Cans
40 - 60 L 1

DPF warning light on? Get it diagnosed first.

Good to know

  • Ideal for cars that do lots of short trips or town driving.
  • It helps regeneration - it can't clear a DPF that is fully blocked or has failed.

Safety

  • Keep out of reach of children.
  • Wear gloves and avoid contact with skin and eyes.
  • If swallowed, get medical advice and show the pack or this page.
  • Take care - engine parts get hot.

Antykoks EGR

EGR, turbo & catalyst cleaner, 250 ml
Petrol, diesel and hybrid engines

How to use

  1. Add the full can to the fuel tank before filling up.
  2. Fill up with 60 - 80 L of fuel.
  3. Drive as normal.
  4. Repeat every 3 - 4 months.

How much to use

Fuel added Cans
60 - 80 L 1

Works through the fuel - no dismantling.

Good to know

  • Targets carbon in the EGR valve, turbo, catalytic converter and lambda sensors.

Safety

  • Keep out of reach of children.
  • Wear gloves and avoid contact with skin and eyes.
  • If swallowed, get medical advice and show the pack or this page.
  • Take care - engine parts get hot.

Antykoks UP

Engine decarbonising foam, 300 ml
Petrol and diesel engines - for competent home mechanics

How to use

  1. Warm the engine to 50 - 60°C, then switch it off.
  2. Remove the spark or glow plugs, with the pistons at mid-stroke.
  3. Spray foam into each cylinder and leave for 5 minutes. Repeat 3 times.
  4. Refit the plugs, crank for 30 seconds, then run for 5 - 10 minutes. Some smoke is normal.
  5. Change the oil and filter afterwards.

Good to know

  • Pair with Antykoks DOWN for a full ring and chamber clean.
  • Rather have it done for you? Ask about a decarbonising service at HAZ.

Safety

  • Keep out of reach of children.
  • Wear gloves and avoid contact with skin and eyes.
  • If swallowed, get medical advice and show the pack or this page.
  • Take care - engine parts get hot.
  • Pressurised container: don't pierce or burn, even when empty.
  • Keep away from heat, sparks and flames; don't expose to over 50°C.
  • Use outdoors or in a well-ventilated area.

Antykoks DOWN

Piston ring decarboniser spray, 220 ml
Petrol and diesel engines - for competent home mechanics

How to use

  1. Warm the engine to 50 - 60°C, then switch it off.
  2. Remove the spark or glow plugs, with the pistons at mid-stroke.
  3. Spray about 5 seconds into each cylinder. Repeat twice.
  4. Refit the plugs, crank for 30 seconds, then run for 5 - 10 minutes. Some smoke is normal.
  5. Change the oil and filter afterwards.

Good to know

  • Pair with Antykoks UP for a full decarbonise.
  • Worn rings or cylinders need mechanical repair - this is a cleaner, not a fix.

Safety

  • Keep out of reach of children.
  • Wear gloves and avoid contact with skin and eyes.
  • If swallowed, get medical advice and show the pack or this page.
  • Take care - engine parts get hot.
  • Pressurised container: don't pierce or burn, even when empty.
  • Keep away from heat, sparks and flames; don't expose to over 50°C.
  • Use outdoors or in a well-ventilated area.

Ceramizator is a treatment, not a repair. Results vary with engine condition and mileage. Effects described are the manufacturer's claims. Made in Poland by CHEMMOTOR.