Akrapovic Slip On Line Race Titanium Exhaust System For Toyota Yaris GR 1.6T 21-23
This exhaust is produced using race-proven, high-grade titanium for the entire system and features megaphone-shaped tailpipes. A collector centred between the rear resonators has been cast in the in-house foundry; this collector optimizes and balances the gas flow to produce an acoustically tuned sound with no drone. Three resonators – two at the back of the collector and one in the middle pipe – further tune the sound experience to create a sporty racing tone, fully enhancing the engine’s characteristics with a deep and enthusiastic sound, to give the occupants a feeling of exhilaration that is never interrupted by excess noise. The engineers have placed a special emphasis on the acoustics in the middle and high rev range, with a high-frequency tone at higher rpms and more sound at idle and revving. This sound is managed by two megaphone-shaped titanium tailpipes that are welded to the exhaust and specially coated to resist any colour changes at high temperatures. The shape of the tailpipes influences the sound. They are bigger than stock, measuring in at 110 mm, and have a similar profile to the Akrapovič exhaust for the Toyota GR Supra. Developed to decrease back pressure, the system weighs in at 7,8 kg, which is 37 % lighter than stock and yields power gains of 9.5 kW (12.9 hp) at 6,950 rpm and torque increases of 13.0 Nm at 6,950 rpm when tested on the Akrapovič dyno against a Toyota GR Yaris with a standard stock exhaust. This exhaust is designed for use on racetracks and closed courses only. It is necessary to cut the stock exhaust system when installing this product, but no ECU remapping is needed for this configuration.
An optional Evolution link pipe is available for customers looking to extend the exhaust tuning possibilities for even better performance of the Akrapovič Slip-On Race Line (Titanium) system.
THIS PRODUCT DOES NOT MEET EMISSION COMPLIANCE REQUIREMENTS FOR STREET OR HIGHWAY USE.
Vehicle FitmentFor Toyota GR Yaris 21-23
Product Details
Product Type: Slip-on Race Line
Power: + 12.9Hp / 6950 rpm
Torque: + 13Nm / 6950 rpm
Weight: -4.7kg
Installation Time: 90 min
Stock Disclaimer
PLEASE NOTE: Majority of Akrapovic products are standard stock and will be with you in a few days. Estimated delivery times in this listing are for guidance purposes only. Delays in production can be due to high order volumes and occasionally some applications have to be special ordered which can usually take 3-4 weeks. If there will be any delays in your order you will be informed within 24 hours.
IMPORTANT NOTE REGARDING - STOCK LEVELS
If you are in urgent need of this product or have any doubt of whether it is in stock due to low quantity, please contact us prior to placing your order to check for availability.
Please read bullet points before purchase:
- The available item quantity is correct at the time of uploading this listing.
- This product may have multiple listings due to application of other suitable vehicles which affect stock levels.
- This product may also be listed on our website which it may be sold through.
- This product may also have sold through our retail store.
Distributed By Haz Motorsport
Guides
Schematic New VersionPerformance Graph
Installation Instruction - EN
