BMW 440i Front and Rear Discs Pads Brake Package DS2500 Lines Hoses RBF660 370MM Discs
Placement on Vehicle: Front left & right, Rear left & right
Caliper Type: BREMBO
Notes: Check brake pad shape in drawing. It must match your current pad shape
Kit Includes:
-
Ferodo DS2500 Brake Pads Front + Rear
-
VBT J Hooked Brake Discs Front + Rear
-
(Select option - One-Piece or Two Piece Design)
- Motul RBF 660 Brake Fluid 500ml x3
- HEL Brake Lines Front + Rear
- Brake Pad Wear Sensors Front + Rear
Ferodo DS2500 Front + Rear Pads
Ferodo DS2500 Competition Brake Pads offer low and high speed braking efficiency, reduced stopping distances and a consistent brake pedal feel from the start. One of the best performance brake pads on the market.
Key Benefits:
- Low noise / low dust
- Long pad life
- Kind on discs
-
Race pedal feel
DS2500 pads offer a consistent coefficient of friction (0.42) at all temperatures
The DS2500 is one of the best hybrid street/track pads on the market. It features the moderately high bite and solid fade resistance of a track pad, with the relatively low dust and noise levels of a street pad. When used as a street pad, it can produce some squeal on certain vehicle platforms. During aggressive driving the DS2500 is known for its flat torque curve, which means as temperatures go up, the response through the brake pedal remains consistent. If you drive aggressively on the street, do some canyon runs, autoX, and maybe some light track duty on street tires, the DS2500 is tough to beat.
This new generation of friction material is very low in compressibility ensuring a firm pedal, whilst still providing low wear rates for discs and pads. Combined with low wheel dusting and good noise characteristics, this compound is the brake pad for the driver who demands the ultimate in track day braking performance.
VBT Front + Rear Hooked Brake Discs
VBT Hooked Discs are the latest disc face design by AP Racing. Vagbremtechnic adapted the initial design onto OEM discs for the following reasons.
1.They give improved bite
2. For high temperature track day use they give better debris clearance and reduces distortion vibration.
For road use we decided to opt for the version where the outer grooves do not run out to outside diameter but stay within the confines of the disc face. For road applications they also generate less noise than straight or curved groove discs and don't suffer the fatigue cracking that drilled disc users can experience after many heat cycles.
So win win for VBT Hooked, Vagbremtechnic also take a non handed OEM casting and LeftRight the VBT Hooked pattern to ensure temperature stability and an appropriately designed disc face for either the nearside or offside of the car to give a good gas path despite not using a handed casting. We've seen some real success on a budget with these discs especially when used with a four piston caliper upgrade.
Where they really come into their own though is when they're combined with a more capable set of brake pads - this is a real track day enabler and we find customers finding other weaker areas of their car such as tyres and suspension now that their car stops reliably again and again. VBT Hooked is the homologated disc face for BTCC and has been for three years.
These discs are a single casting and are a direct replacement for the OEM composite disc
Hosetechnik Brake Line Kit
- Better brake pedal feel – firmer under pressure
- More efficient braking- the PTFE lined, Stainless steel brake lines will not expand under load unlike OEM rubber hoses
- Long Lasting- PVC outer and Stainless-Steel end fittings will outlast the standard Mild Steel and rubber lines many times
- Available in many outer colour options to compliment your vehicle
- Rigorously tested and approved to the FMVSS 106 certification standards
*This product is sold for Off Road/Race Track Use Only
(for use in motorsport and competition racing only)
Please abide by the governing laws in your respective country.
Some brake pads we supply are designed for motorsport/off road use and do not have ECE-R90 certification; it is therefore not recommended for road use in those countries which require ECE-R90 approval. The customer takes full responsibility for checking the brake components purchased meet current regulation in there country if they intend to use the vehicle on public roads.
PLEASE NOTE: Majority of Ferodo Racing products are standard stock and will be with you in a few days. Estimated delivery times in this listing are for guidance purposes only. Delays in production can be due to high order volumes and occasionally some applications have to be special ordered which can usually take 4 weeks. If there will be any delays in your order you will be informed within 24 hours.
IMPORTANT NOTE REGARDING - STOCK LEVELS
If you are in urgent need of this product or have any doubt of whether it is in stock due to low quantity, please contact us prior to placing your order to check for availability.
Please read bullet points before purchase:
- The available item quantity is correct at the time of uploading this listing.
- This product may have multiple listings due to application of other suitable vehicles which affect stock levels.
- This product may also be listed on our website which it may be sold through.
- This product may also have sold through our retail store.
Distributed By Haz Motorsport
