Forge Induction Kit Turbo Inlet Adaptor Inlet Hose For VAG 1.0 TSI Late 2021-22

FMINDK52 is the Forge Motorsport cold air induction system for the 2022 onwards 1.0 TSI engine found in a large selection of vehicles from the VW, Audi, Skoda, and Seat range. With the highly successful FMINDK30 and FMINDK39 induction kits for the previous generation 1.0 TSI VAG vehicles there has been a large demand for Forge Motorsport to develop an improved air intake system for the latest VAG power unit. 

As with all manufacturers in recent times, the need to make smaller capacity engines more powerful with better efficiency has been their top priority. To achieve these goals, the OEM design engineers must maximise the space to its fullest, which in turn creates more of a challenge for the aftermarket manufacturers and tuners to improve what is already fitted to the vehicle. Nonetheless, this has not stopped us at Forge Motorsport! Even with plenty of expertise from past developments with the previous small capacity VAG engines, this new power unit needed an extensive amount of testing time to ensure we produced a product that provided genuine improvements over the standard air box. 

The CAD designed, laser cut, and precision folded heat shield is designed to form a barrier between the air inlet tract and radiant heat from the engine. It also helps duct the cold air to the air filter, to preserve low intake temperatures, which in-turn creates more power. 

Finished in our black textured powder coating, this creates a product with an OEM look and quality. This kit is offered with our Forge high flow, pleated, synthetic nanofiber filtration filter, which has been manufactured for optimum size and fit to the available space giving superior flow and filtration with enhanced breathing for the 1.0 turbo charged engine.  

Alternatively, there is our foam filter option available soon that has been exclusively manufactured by Pipercross. During dyno testing we tried several filter options and we found that neither filter excelled over the other with results being almost identical throughout the rev range. 

Both the filters offered can be oiled by the end user to prevent fine dust commonly found in hot climates from entering the inlet tract. Testing was completed using Performance Remap in Gloucester with their VTEC 4 wheel drive dynamometer. This was to ensure all our data has been achieved with results as accurately as possible by an independent tuner.

The dyno graph below shows torque gains at 2600RPM all the way to redline, with a gain of nearly 10NM from between 3000RPM and 3500RPM. 

This gain is very beneficial as it is consistently higher than stock from turbo spool up through to full boost, resulting in noticeably sharper acceleration and a more exhilarating experience for the driver, as typically this is where true power gains can be felt when behind the wheel.

The Forge Motorsport induction kit FMINDK52 includes all the necessary hardware and step by step installation instructions for any car enthusiast with basic garage tools to fit at home, in just a couple of hours! 

FMINLH26

FMINLH26 is our replacement intake hose for the 2022- VAG 1.0 TSI engine. This is a direct replacement for the original plastic inlet hose. 

This is a simple fitment which replaces the entire restrictive rear factory plastic ‘bellows’ pipe between the airbox and the turbocharger inlet. 

Constructed from reinforced high quality 5 ply silicone, this hose offers increased rigidity to prevent deformation from engine movement or heat cycles. This product is offered in two colours, gloss black or bright red, so this hose is not only functional but it also improves the aesthetics of the TSI engine bay.

This product takes about 10 minutes to install and like all our silicone products, is covered by our lifetime warranty.

FMTIA13

With the interest of tuning the VAG 1.0 TSI engines growing ever more, Forge Motorsport's R&D department has designed another product to extract extra power. 

The product in question is our enlarged turbo elbow. The OEM part’s design requirements are a balance between performance, efficiency, and refinement. Here at Forge Motorsport, we have concentrated on the performance aspect of the product, which has been achieved by removing the internal restrictions then enlarging and smoothing out the pathway to the turbo. 

Several different designs and material choices were tested until we arrived with the product you see here. The construction of FMTIA13 is manufactured from reinforced multi ply silicone which is more durable than the OEM plastic pipe and it wont suffer from heat soak like a metallic product can. 

With its enlarged capacity and less restrictive surface area it routes air directly into your turbo charger and allows a greater volume of air to be compressed, this has a positive effect on accelerating your vehicle after long deceleration or in between gear changes due to more air being kept within the inlet tract to the turbo charger. 

This is a product which is essential when tuning the 1.0 TSI engine (DLAA, DLA) as it was an area where we saw positive gains when tuning the previous generation VAG 1.0 TSI. On a tuned vehicle we would expect to see consistent gains of 3-5 bhp depending on the vehicles state of tune. 

This is a straightforward yet very effective power increasing modification that can be fitted with basic tools and has a typical installation time of around 30 minutes. As with all Forge Motorsport products it includes a full set of comprehensive installation instructions to make fitting as straightforward as possible. 

Compatible Vehicle

Audi

• A1 (GB) 25/30 1.0 TSI (2022 - Onwards)
• A3 1.0 TSI (2022 - Onwards)
• Q2 1.0 TSI (2022 - Onwards)

Seat

• Arona 1.0 TSI (2022 - Onwards)
• Ateca 1.0 TSI (2022 - Onwards)
• Ibiza 1.0 TSI Mk5 (KJ) 2017 - late 2021

Skoda

• Fabia 1.0 TSI (2022 - Onwards)
• Kamiq 1.0 TSI (2022 - Onwards)
• Karoq 1.0 TSI (2022 - Onwards)
• Octavia 1.0 TSI (2022 - Onwards)
• Scala 1.0 TSI (2022 - Onwards)

Volkswagen

• Golf Mk8 1.0 TSI (2022 - Onwards)
• Polo 1.0 TSI (2022 - Onwards)
• T-Cross 1.0 TSI (2022 - Onwards)
• T-Roc 1.0 TSI (2022 - Onwards)
• Taigo 1.0 TSI (2022 - Onwards)

PLEASE NOTE: Majority of Forge Motorsport products are processed straight away, but occasionally some applications have to be special ordered which can usually take 10-15 working days. If there will be any delays in your order you will be informed within 24-48 hours.

*Image for illustration purposes only

IMPORTANT NOTE REGARDING - STOCK LEVELS

If you are in urgent need of this product or have any doubt of whether it is in stock due to low quantity, please contact us prior to placing your order to check for availability.

Please read bullet points before purchase:

• The available item quantity is correct at the time of uploading this listing.
• This product may have multiple listings due to application of other suitable vehicles which affect stock levels. 
• This product may also be listed on our website which it may be sold through.
• This product may also have sold through our retail store. 

Distributed By Haz Motorsport

Product Details