Forge Motorsport Turbo Inlet Adaptor FMTIA11 for Hyundai 1.6 i20N 2021-Onwards

Forge Motorsport Turbo Inlet Adaptor FMTIA11 for Hyundai 1.6 i20N 2021-Onwards


Product Details
Manufacturer Part Number: FMTIA11Brand: Forge MotorsportCountry/Region of Manufacture: United KingdomManufacturer Warranty: LifetimeFitment: Hyundai 1.6 i20N 2021-Onwards
With Forge Motorsport leading the way in aftermarket products for the Hyundai N division vehicles, we are proud to present our Turbo Inlet Adaptor and Intake Tract for the Hyundai i20N. 
The kit is a full plug and play solution, with a replacement cast turbo inlet adaptor, CNC machined hose couplers, and a silicone high flow inlet hose. Available in a choice of Black, Red, and Performance Blue, the TIA11 will not only increase your Hyundai’s performance, but it also transforms the look and aesthetics of your vehicle’s engine bay.
The size of the inlet elbow has increased by over 170% to maximise the amount of air that can physically flow to the turbo from the inlet tract. 
The OEM factory alloy cast elbow is small, so we knew that this would be the key component to target as tuners start to increase the boost levels and performance output of the 1.6l turbocharged combustion engine. As well as this, the plastic OEM inlet hose has ribs and steps within the bore, causing detrimental turbulence while disturbing and slowing the airflow. 
By removing the ribs and steps, the larger Forge Motorsport silicone turbo inlet hose reduces the amount of turbulence over the standard item, enabling better airflow.
In the development process we tested an oversized aluminium pipe and found that it started to show signs of heat soak, this had a detriment to the impressive initial power gains. 

We also found after the third pull on the Dyno, the alloy pipe conducted too much heat on this application and started to decrease the gains. 
When using silicone, heat cannot be conducted as well, therefore even after six pulls, the silicone hose stayed at a steady temperature and did not decrease the power whatsoever.
The turbo inlet adaptor improves your vehicles airflow in several ways; designed in a similar way to a conventional velocity stack, it routes the air directly into your turbo charger and allows more air to be compressed due to its larger capacity, this has a positive effect when accelerating your vehicle after long deceleration, or in-between gear changes, due to more air being kept within the intake system.
As you can see from the dyno results below, peak power was increased from stock by nearly 7 BHP and 12NM of torque when mated to the OEM airbox and standard factory filter. 
The best news is that there are significant gains across the entire rev range, meaning that the car will pick up quicker and pull the whole way through to redline. 
TIA11 also benefits from a 17NM of power gain between 2500 RPM and 3000 rpm, this is right as the power comes in and can really change the feel and power delivery when behind the wheel.
PLEASE NOTE: Majority of Forge Motorsport products are processed straight away, but occasionally some applications have to be special ordered which can usually take upto a maximum of 10-15 working days. If there will be any delays in your order you will be informed within 24-48 hours.
*Image for illustration purposes only

IMPORTANT NOTE REGARDING - STOCK LEVELS

If you are in urgent need of this product or have any doubt of whether it is in stock due to low quantity, please contact us prior to placing your order to check for availability.

Please read bullet points before purchase:

• The available item quantity is correct at the time of uploading this listing.
• This product may have multiple listings due to application of other suitable vehicles which affect stock levels. 
• This product may also be listed on our website which it may be sold through.
• This product may also have sold through our retail store. 

Distributed By Haz Motorsport

Product Details

Brand: Forge Motorsport
Manufacturer Part Number: FMTIA11
Type: Turbo Inlet Adaptor
Reference OE/OEM Number: FMTIA11
Manufacturer: Forge Motorsport
Manufacturer Warranty: Lifetime
Classic Part: No
Country/Region of Manufacture: United Kingdom
Features: turbo inlet adaptor improves your vehicles airflow
Fluid Type: Air
Interchange Part Number: FMTIA11
Items Included: Forge Motorsport Turbo Inlet FMTIA11
Material: Aluminium
Model: Hyundai i20N 1.6 (2021 - Onwards)
MPN: FMTIA11
Performance Part: Yes
Placement on Vehicle: Engine Compartment
Seller Warranty: Lifetime
Colour:: Performance Blue