Forge Motorsport Uprated Front Mount Intercooler Kit With Hoses For VW Golf MK8 R / GTI / Clubsport Edition 45 / Audi S3 8Y / Cupra Formentor
FMINT24 is a performance intercooler for the MQB platforms with the EA888 GEN4 Engine. Produced, designed, and tested, at our headquarters in Gloucester UK. Throughout the development process we have strived to improve the efficiency and performance of the EA888 GEN4 engine. Our project brief was to develop an intercooler that utilised all of the available space in the original position of the OEM intercooler, and to ensure the inlet air temperature is reduced, without any negative effects on the boost pressure or engine and transmission cooling.
In the MQB chassis the intercooler housing is particularly restricted and confined to a small amount of space, due to it not only housing the intercooler, but also the radiator and air conditioning condenser. The front panel in theory is a sandwich pack that houses the auxiliary cooling components. This means in order to increase the size of the intercooler without paying detriment to the performance of the surrounding items, and with also having very little extra space available, that it can be very difficult to execute the perfect blend of a high flow intercooler within such a close proximity.
Our research and development engineers started with a brief to fit our existing intercooler (FMMK7FMIC) that was for the MK7 platform, to our development VW MK8 Golf R. Upon installation, we then tried to establish if we could re-engineer the intercooler with an increased inlet and outlet size along with increasing the volumetric capacity to increase flow along with future proofing the design to work well with highly tuned stage 3 plus EA888 Gen 4 engines.
Using a combination of scanning software and traditional measuring methods, the design was created. This was then fine-tuned by our flow dynamics simulations programs (CFD), and the end tanks were initially created by 3D printers. This enabled us to ensure the fit was perfect on the vehicle before any prototype castings or machined billet end tanks were produced ready for dyno testing.
With an increase in inlet and outlet sizes, we then turned our attention to the design of our silicone hoses. With flow in mind, we have created a step within the hose so where the hose meets the hot and cold side of the inlet and outlet junctions the transition is seamless, this helps to lesson any disturbance to the airflow and prevent unwanted turbulence. To further aid with flow, the inlet and outlets have been increased to 76mm from the OEM size of 63mm which equates to a 45% increase in surface area.
The Forge Motorsport intercooler is a perfect performance enhancing product that fits directly to the OEM mounting points, making for an easy install, in a relatively short period of time. No cutting of any components is needed, making the installation reversible if the vehicle needs to be returned to stock at any time in the future. The core and end tanks are finished in our black textured anti corrosion coating that also aids with its thermal properties and keeps the product looking that bit stealthier or OEM+.
During our extensive testing, we let the car heat soak on the dyno until the radiator fans tripped on and off (which gives an inlet temperature of around 40°C). We then did a dyno pull from this point which gives a more consistent result and reflects real-world driving conditions more accurately. You can easily see the Forge intercooler cools much quicker and delivers a much greater drop in temperature compared to OEM. peak power was increased from stock by 11bhp and 20nm of torque at 5500RPM. The best news is that there are significant torque gains throughout the rev range, meaning that the car power will pick up quicker and pull the whole way through to redline, including an impressive gain in BHP from 5000 RPM TO 6500 RPM. Gains on vehicles with re calibrated software and further hardware performance parts can be expected to be a lot higher due to the substantial drop in IATS when FMINT24 is installed.
The Forge Motorsport lifetime warranty on all hardware products shows the trust we have in the quality of our products while they are being enjoyed on your pride and joy.
Vehicles
- Audi S3 2.0TSI (8Y)
- Audi S3 Sportback 2.0TSI (8Y)
- Cupra Formentor VZ1, VZ2, VZ3
- Cupra Leon VZ1, VZ2, VZ3
- VW Golf MK8 GTI Clubsport Edition 45
- VW Golf MK8 GTI
-
VW Golf MK8 R
*Please
note: The majority of Forge Motorsport products are processed straight
away, but occasionally some applications have to be special ordered
which can take upto a maximum of 2/3 weeks for deliver. If there will be any delays in your order you will
be informed within 24-48 hours.
Distributed By Haz Motorsport
Product Details
Brand: Forge Motorsport
Manufacturer Part Number: Does Not Apply
Reference OE/OEM Number: VW Golf GTI MK8~VW Golf GTI MK8 Clubsport~Audi S3 8Y~VW Golf R MK8~Forge Motorsport~Intercooler Kit~FMINT24
Country/Region of Manufacture: United Kingdom
Kit Contains: Intercooler Hoses and Fittings
Modified Item: No
Vehicle Fitment: MQB EA888 Gen 4 Engines 2.0 T
