Forge Motorsport Oil Catch Tank/Can Kit For Mercedes A45 AMG W176 +FL 360/380hpHAZ-33
Compatibility GuideBefore purchasing this item, please check that your engine has a compatible type of breather hose as there are 2 variations fitted to the Mercedes M133 engine fitted to the A45 AMG. The hoses included with this kit use Norma type hose fittings as shown in the images below and will not fit engines with Bayonet type hose fittings.
Extensive testing has proven our oil catch tank’s ability to effectively reduce sludge and carbon build up, in turn allowing the Mercedes M133 engine to both breathe and perform more efficiently. It can therefore be viewed as a genuine performance enhancing product and one we recommend any owner of this vehicle seriously consider, particularly if they are planning more advanced power tuning at a later date.
The 0.4l (400cc) catch tank boasts a slew of features intended to make it both easy to check and simple to drain, including a dipstick for level inspection and a well-placed drain tap.
The design of the hose kit has also been carefully considered, hence its inner tube which is constructed from anti-static smooth fuel resistant nitrile rubber. This is paired with an outer cover made from reinforced stainless-steel wire braid (a Forge specialty), specifically a partial inner braid and a full cover outer braid. We developed this complex arrangement in order for the tank to be resistant to both pressure expansion and vacuum collapse, and also to enable the kit to function within a clearly defined temperature range -54°C to +150°C (-65°F to 300°F)
- 0.4L capacity*
- A drain tap for ease of emptying.
- A dipstick for simple level inspection
- 2 Quality stainless steel reinforced oil resistant hoses with black external braiding for that inconspicuous look
- Fully assembled with fittings to suit the OEM connections
- Inner tube is constructed from anti-static smooth fuel resistant nitrile rubber
- Outer cover is constructed from reinforced Stainless Steel wire braid consisting of partial inner braid & full cover outer braiding which is resistant to pressure expansion and vacuum collapse
- Temperature Range: -54°C to +150°C (-65°F to 300°F)
- Can be installed in less than 30 minutes
- Installation is straight forward with all necessary fittings and instructions included
To check your vehicle, you will find the hose fittings in the area circled below.
Norma type fitting – This kit will fit your vehicle.
Bayonet type fitting – This kit will not fit your vehicle.
We Also Recommend
Forge Motorsport Alloy Turbo Intake Inlet Elbow MQB Audi S3 8V + Audi S1 2.0 TSI
Audi A3 3.2 V6 8P 250 Forge Motorsport Induction Intake Air Filter Kit Black
Astra J MK6 VXR GTC 2.0 TURBO Forge Motorsport Direct Fit Piston Blow Off Valve